Dell PowerConnect J-8216 Software Guide for JUNOS version 10.3 - Page 1996

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS Table 240: show route damping Output Fields (continued) Field Name Field Description Level of Output Age How long the route has been known. detail extensive Metric Metric for the route. detail extensive Task Name of the protocol that has added the route. detail extensive Announcement bits List of protocols that announce this route. n-Resolve inet indicates that the route is used for route resolution for next hops found in the routing table. n is an index used by Dell Support only (see "Requesting Technical Support" on page lxxi). detail extensive AS path to AS path through which the route was learned. The letters at the end of the AS path indicate the path origin, providing an indication of the state of the route at the point at which the AS path originated: All levels • I-IGP. • E-EGP. • ?-Incomplete; typically, the AS path was aggregated. When AS path numbers are included in the route, the format is as follows: • [ ]-Brackets enclose the local AS number associated with the AS path if more than one AS number is configured on the routing device or if AS path prepending is configured. • { }-Braces enclose AS sets, which are groups of AS numbers in which the order does not matter. A set commonly results from route aggregation. The numbers in each AS set are displayed in ascending order. • ( )-Parentheses enclose a confederation. • ( [ ] )-Parentheses and brackets enclose a confederation set. Next hop to the destination. An angle bracket (>) indicates that the route is the brief none selected route. via Interface used to reach the next hop. If there is more than one interface available brief none to the next hop, the interface that is actually used is followed by the word Selected. Communities Community path attribute for the route. See the output field table for the show detail extensive route detail command. Localpref Local preference value included in the route. All levels Router ID BGP router ID as advertised by the neighbor in the open message. detail extensive Merit (last update/now) Last updated and current figure-of-merit value. detail extensive damping-parameters Name that identifies the damping parameters used, which is defined in the damping statement at the [edit policy-options] hierarchy level. detail extensive Last update Time of most recent change in path attributes. detail extensive 1924