Dell PowerConnect J-8216 Software Guide for JUNOS version 10.3 - Page 1897

Chapter 74: Operational Commands for Layer 3 Protocols Table 216: show bgp summary Output Fields (continued) Field Name Field Description History Number of withdrawn routes stored locally to keep track of damping history. Damp State Number of routes with a figure of merit greater than zero, but still active because the value has not reached the threshold at which suppression occurs. Pending Routes in process by BGP import policy. Peer Address of each BGP peer. Each peer has one line of output. AS Peer's AS number. InPkt Number of packets received from the peer. OutPkt Number of packets sent to the peer. OutQ Count of the number of BGP packets that are queued to be transmitted to a particular neighbor. It normally is 0 because the queue usually is emptied quickly. Flaps Number of times the BGP session has gone down and then come back up. Last Up/Down Last time since the neighbor transitioned to or from the established state. State|#Active /Received/Accepted /Damped Multipurpose field that displays information about BGP peer sessions. The field's contents depend upon whether a session is established and whether an established session was established in the main routing device or in a routing instance. • If a peer is not established, the field shows the state of the peer session: Active, Connect, or Idle. • If a BGP session is established in the main routing device, the field shows the number of active, received, accepted, and damped routes that are received from a neighbor and appear in the inet.0 (main) and inet.2 (multicast) routing tables. For example, 8/10/10/2 and 2/4/4/0 indicate the following: • 8 active routes, 10 received routes, 10 accepted routes, and 2 damped routes from a BGP peer appear in the inet.0 routing table. • 2 active routes, 4 received routes, 4 accepted routes, and no damped routes from a BGP peer appear in the inet.2 routing table. • If a BGP session is established in a routing instance, the field indicates the established (Establ) state, identifies the specific routing table that receives BGP updates, and shows the number of active, received, and damped routes that are received from a neighbor. For example, Establ VPN-AB.inet.0: 2/4/0 indicates the following: • The BGP session is established. • Routes are received in the VPN-AB.inet.0 routing table. • The local routing device has two active routes, four received routes, and no damped routes from a BGP peer. When a BGP session is established, the peers are exchanging update messages. 1825