Dell PowerConnect J-8216 Software Guide for JUNOS version 10.3 - Page 2074

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS Table 250: show route receive-protocol Output Fields (continued) Field Name Field Description Level of Output AS path Cluster list Autonomous system (AS) path through which the route was learned. The letters at the end of the AS path indicate the path origin, providing an indication of the state of the route at the point at which the AS path originated: All levels • I-IGP. • E-EGP. • ?-Incomplete; typically, the AS path was aggregated. When AS path numbers are included in the route, the format is as follows: • [ ]-Brackets enclose the number that precedes the AS path. This number represents the number of ASs present in the AS path, when calculated as defined in RFC 4271. This value is used the AS-path merge process, as defined in RFC 4893. • [ ]-If more than one AS number is configured on the router, or if AS path prepending is configured, brackets enclose the local AS number associated with the AS path. • { }-Braces enclose AS sets, which are groups of AS numbers in which the order does not matter. A set commonly results from route aggregation. The numbers in each AS set are displayed in ascending order. • ( )-Parentheses enclose a confederation. • ( [ ] )-Parentheses and brackets enclose a confederation set. (For route reflected output only) Cluster ID sent by the route reflector. detail extensive Originator ID (For route reflected output only) Address of routing device that originally sent detail extensive the route to the route reflector. Communities Community path attribute for the route. See the Output Field table in the show detail extensive route detail command for all possible values for this field. Attrset AS Number, local preference, and path of the AS that originated the route. These values are stored in the Attrset attribute at the originating routing device. detail extensive Layer2-info: encaps Layer 2 encapsulation (for example, VPLS). detail extensive control flags Control flags: none or Site Down. detail extensive mtu Maximum transmission unit (MTU) of the Layer 2 circuit. detail extensive show route receive-protocol bgp user@host> show route receive-protocol bgp 10.255.245.215 inet.0: 28 destinations, 33 routes (27 active, 0 holddown, 1 hidden) Prefix Next hop MED Lclpref AS path 10.22.1.0/24 10.255.245.215 0 100 I 10.22.2.0/24 10.255.245.215 0 100 I show route receive-protocol bgp extensive user@host> show route receive-protocol bgp 10.255.245.63 extensive inet.0: 244 destinations, 244 routes (243 active, 0 holddown, 1 hidden) Prefix Next hop MED Lclpref AS path 1.1.1.0/24 (1 entry, 1 announced) 2002