Dell PowerConnect J-8216 Software Guide for JUNOS version 10.3 - Page 1972

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS Table 239: show route Output Fields (continued) Field Name Field Description destination-prefix Route destination (for example:10.0.0.1/24). Sometimes the route information is presented in another format, such as: • MPLS-label (for example, 80001). • interface-name (for example, ge-1/0/2). • neighbor-address:control-word-status:encapsulation type:vc-id :source (Layer 2 circuit only; for example, 10.1.1.195:NoCtrlWord:1:1:Local/96): • neighbor-address-Address of the neighbor. • control-word-status-Whether the use of the control word has been negotiated for this virtual circuit: NoCtrlWord or CtrlWord. • encapsulation type-Type of encapsulation, represented by a number: (1) Frame Relay DLCI, (2) ATM AAL5 VCC transport, (3) ATM transparent cell transport, (4) Ethernet, (5) VLAN Ethernet, (6) HDLC, (7) PPP, (8) ATM VCC cell transport, (10) ATM VPC cell transport. • vc-id-Virtual circuit identifier. • source-Source of the advertisement: Local or Remote. [ protocol, preference ] Protocol from which the route was learned and the preference value for the route. • +-A plus sign indicates the active route, which is the route installed from the routing table into the forwarding table. • - -A hyphen indicates the last active route. • *-An asterisk indicates that the route is both the active and the last active route. An asterisk before a to line indicates the best subpath to the route. In every routing metric except for the BGP LocalPref attribute, a lesser value is preferred. In order to use common comparison routines, Junos OS stores the 1's complement of the LocalPref value in the Preference2 field. For example, if the LocalPref value for Route 1 is 100, the Preference2 value is -101. If the LocalPref value for Route 2 is 155, the Preference2 value is -156. Route 2 is preferred because it has a higher LocalPref value and a lower Preference2 value. weeks:days hours:minutes:seconds How long the route been known (for example, 2w4d 13:11:14, or 2 weeks, 4 days, 13 hours, 11 minutes and 14 seconds). metric Cost value of the indicated route. For routes within an AS, the cost is determined by IGP and the individual protocol metrics. For external routes, destinations, or routing domains, the cost is determined by a preference value. localpref Local preference value included in the route. from Interface from which the route was received. 1900