Dell PowerConnect J-8216 Software Guide for JUNOS version 10.3 - Page 3266

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS Table 425: show mpls lsp Output Fields (continued) Field Name Field Description Level of Output Received RRO Index number (Ingress LSP) Received record route. A series of hops, each with an address followed by a flag. (In most cases, the received record route is the same as the computed explicit route. If Received RRO is different from Computed ERO, there is a topology change in the network, and the route is taking a detour.) The following flags identify the protection capability and status of the downstream node: detail extensive • 0x01-Local protection available. The link downstream from this node is protected by a local repair mechanism. This flag can be set only if the Local protection flag was set in the SESSION_ATTRIBUTE object of the corresponding Path message. • 0x02-Local protection in use. A local repair mechanism is in use to maintain this tunnel (usually because of an outage of the link it was routed over previously). • 0x03-Combination of 0x01 and 0x02. • 0x04-Bandwidth protection. The downstream routing device has a backup path providing the same bandwidth guarantee as the protected LSP for the protected section. • 0x08-Node protection. The downstream routing device has a backup path providing protection against link and node failure on the corresponding path section. If the downstream routing device can set up only a link-protection backup path, the Local protection available bit is set but the Node protection bit is cleared. • 0x09-Detour is established. Combination of 0x01 and 0x08. • 0x10-Preemption pending. The preempting node sets this flag if a pending preemption is in progress for the traffic engine LSP. This flag indicates to the ingress legacy edge router (LER) of this LSP that it should be rerouted. • 0xb-Detour is in use. Combination of 0x01, 0x02, and 0x08. (Ingress LSP) Log entry number of each LSP path event. The numbers are in extensive chronological descending order, with a maximum of 50 index numbers displayed. Date (Ingress LSP) Date of the LSP event. extensive Time (Ingress LSP) Time of the LSP event. extensive Event (Ingress LSP) Description of the LSP event. extensive Created (Ingress LSP) Date and time the LSP was created. extensive Resv style (Bypass) RSVP reservation style. This field consists of two parts. The first is the number of active reservations. The second is the reservation style, which can be FF (fixed filter), SE (shared explicit), or WF (wildcard filter). brief detail extensive Labelin Incoming label for this LSP. brief detail Labelout Outgoing label for this LSP. brief detail LSPname Name of the LSP. brief detail 3194