Dell PowerEdge 1650 Rack Installation Guide - Page 13
Installing the VersaRails Slide Assemblies, At the back of the cabinet
View all Dell PowerEdge 1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing the VersaRails Slide Assemblies 1 At the front of the rack cabinet, position one of the VersaRails slide assemblies so that its mounting-bracket flange fits between the marks or tape (or numbered location) on the rack (see Figure 1-6). The three holes on the front of the mounting bracket should align with three of the holes between the marks you made on the front vertical rail. 2 Install two 10-32 x 0.5-inch flange-head Phillips screws in the mounting flange's top and bottom holes to secure the slide assembly to the front vertical rail (see Figure 1-6). 3 At the back of the cabinet, pull back on the mounting-bracket flange until the mounting holes align with their respective holes on the back vertical rail. 4 Install three 10-32 x 0.5-inch flange-head Phillips screws in the back mounting holes to secure the slide assembly to the back vertical rail. Figure 1-6. Installing the VersaRails Slide Assemblies slide assemblies (2) mounting-bracket flange 10-32 x 0.5-inch flange-head Phillips screws (5 per slide assembly) front of rack Rack Installation Guide 1-9