Dell PowerEdge 1650 Rack Installation Guide - Page 18
Routing Cables, Installation and Troubleshooting, Guide, User's Guide - will not power on
View all Dell PowerEdge 1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
www.dell.com | support.dell.com 7 Route the status-indicator end of the cable assembly through the cable-management arm, and install the indicator in its slot at the back end of the cable-management arm (see Figure 1-9). 8 Connect the power cords to their receptacles on the back panel. NOTICE: Although the strain-relief can accommodate power cords with a bend radius of up to 19 mm (0.75 inch), the system manufacturer recommends that you only use the power cords provided with the system. 9 Install a tie-wrap through the slot on the strain-relief tab (see Figure 1-10). 10 Bend the power cords back beside the power receptacle housing, forming a tight loop, and install the strain-relief tie-wrap loosely around the looped power cords (see Figure 1-10). Figure 1-10. Installing the Power Cord Strain Relief power cord strain-relief tab and tie wrap power receptacle housing power cord plug Routing Cables 1 Attach the I/O cable connectors to their respective connectors on the system back. For details on cable connections, see your system's Installation and Troubleshooting Guide and the User's Guide. 1-14 Rack Installation Guide