Dell PowerEdge C5230 Dell Systems Hardware Owners Manual - Page 108
Replacing a Memory Module
View all Dell PowerEdge C5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Replacing a Memory Module WARNING: The memory modules are hot to touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components on the memory module. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product. The system board has four slots in two channels for the installation of memory modules. See "System Board Jumpers and Connectors" on page 137 for the location of the memory modules. Follow the instructions given below to install memory modules: 1 Align the memory module correctly with the DIMM slot. Note the notch and obstruction in Figure 3-6. 2 Press the edge connector of the memory module into the DIMM slot. Press down firmly on the memory module so that the locking latches of the DIMM slot are levered upwards to secure the memory module in place. 108 Installing System Components