Dell PowerEdge C5230 Dell Systems Hardware Owners Manual - Page 97
Command Line Interfaces for Setup options
View all Dell PowerEdge C5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Command Line Interfaces for Setup options The SETUP menu provides setup options through the system configuration utility (syscfg), included in the Dell OpenManage Deployment Toolkit (DTK). Users can use the utility as following: To change the SETUP option thru D4 token: ./syscfg -t=D4_token_id Example: ./syscfg -t=0x002D to enable NIC1 To check token active status: ./syscfg --istokenactive=D4_token_id Example: ./syscfg --istokenactive=0x002D to check the token active status of NIC1 To directly change the SETUP option thru BMC memory: ./ipmitool raw Example: ./ipmitool raw 0xc 1 1 3 10 106 42 120 to set IP address of BMC LAN port as 10.106.42.120 Using the System Setup Program 97
Using the System Setup Program
97
Command Line Interfaces for Setup options
The SETUP menu provides setup options through the system configuration
utility (syscfg), included in the Dell OpenManage Deployment Toolkit
(DTK).
Users can use the utility as following:
To change the SETUP option thru D4 token:
./syscfg –t=D4_token_id
Example:
./syscfg -t=0x002D to enable NIC1
To check token active status:
./syscfg --istokenactive=D4_token_id
Example:
./syscfg --istokenactive=0x002D to check the token active status of NIC1
To directly change the SETUP option thru BMC memory:
./ipmitool raw <command> <data>
Example:
./ipmitool raw 0xc 1 1 3 10 106 42 120 to set IP address of BMC LAN port
as 10.106.42.120