Dell PowerEdge C5230 Dell Systems Hardware Owners Manual - Page 111
Installing a 2.5-inch Hard Drive, Aligning the 2.5 Hard Drive Bracket
View all Dell PowerEdge C5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Installing a 2.5-inch Hard Drive 1 Align the 2.5-inch hard drive bracket on the new hard drive then replace the four screws. Figure 3-10. Aligning the 2.5" Hard Drive Bracket NOTE: The correct orientation of the bracket is with the arrow mark pointing towards the hard drive connector. 2 Connect the hard drive to the hard drive board in the sled. Figure 3-11. Connecting the 2.5" Hard Drive to the Hard Drive Board 2.5" HDD 2.5" HDD 2.5" HDD 2.5" HDD HDD0 HDD1 HDD2 HDD3 3 Replace the sled hard drive bracket screws underneath the sled. Installing System Components 111
Installing System Components
111
Installing a 2.5-inch Hard Drive
1
Align the 2.5-inch hard drive bracket on the new hard drive then replace
the four screws.
Figure 3-10.
Aligning the 2.5" Hard Drive Bracket
NOTE:
The correct orientation of the bracket is with the arrow mark pointing
towards the hard drive connector.
2
Connect the hard drive to the hard drive board in the sled.
Figure 3-11.
Connecting the 2.5" Hard Drive to the Hard Drive Board
3
Replace the sled hard drive bracket screws underneath the sled.
HDD0
2.5” HDD
HDD1
2.5” HDD
HDD2
2.5” HDD
HDD3
2.5” HDD