Dell PowerEdge C6105 Using the Baseboard Management Controller  - Page 46

BMC Version Information, BIOS Firmware Information, Present with ASCII Code : S2G_3A15

Get Dell PowerEdge C6105 PDF manuals and user guides View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

>11 00 00 VLAN is disabled/VLAN ID is zero. 2 Enable and Set VLAN ID : >ipmitool -H -I lanplus -U root -P root raw 0x0C 0x01 0x01 0x14 0x02 0x80 3 Disable VLAN ID : >ipmitool -H -I lanplus -U root -P root raw 0x0C 0x01 0x01 0x14 0x00 0x00 BMC Version Information The BMC firmware version can be obtained by using the IPMI - Get Device ID command. To get the BMC firmware version: >ipmitool -H -I lanplus -U root -P root raw 0x06 0x01 >20 01 01 16 02 bf 4c 1c 00 47 32 11 76 00 00 Version 1.16 BIOS Firmware Information The BIOS firmware version can be obtained by using the IPMI - Get Device ID command. To get the BIOS firmware version: > ipmitool -H -I lanplus -U root -P root raw 0x30 0x1e > 53 32 47 5F 33 41 31 35 00 00 Present with ASCII Code : S2G_3A15 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
46
>11 00 00
VLAN is disabled/VLAN ID is zero.
2
Enable and Set VLAN ID :
>ipmitool -H <BMC IP Address> -I lanplus -U root -P root raw 0x0C
0x01 0x01 0x14 0x02 0x80
3
Disable VLAN ID :
>ipmitool -H <BMC IP Address> -I lanplus -U root -P root raw 0x0C
0x01 0x01 0x14 0x00 0x00
BMC Version Information
The BMC firmware version can be obtained by using the IPMI - Get Device
ID command.
To get the BMC firmware version:
>ipmitool -H <BMC IP Address> -I lanplus -U root -P root raw 0x06
0x01
>20 01 01 16 02 bf 4c 1c 00 47 32 11 76 00 00
Version 1.16
BIOS Firmware Information
The BIOS firmware version can be obtained by using the IPMI - Get Device
ID command.
To get the BIOS firmware version:
> ipmitool -H <BMC IP Address> -I lanplus -U root -P root raw 0x30
0x1e
> 53 32 47 5F 33 41 31 35 00 00
Present with ASCII Code : S2G_3A15