Dell PowerEdge C6220 II Using the Baseboard Management Controller - Page 36
Trap Settings, IPv4 Destination List
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
FILE LOCATION: D:\Projects\User Guide\Server\Dell\C6220II\BMC\C6220II_BMC_HOM_section1.fm Table 1-20. Platform Event Filters Items Apply Changes Button Description Use this button to apply the changes. NOTE: BMC event log "Processor #0x1c" or "Processor #0x1d" clarification: This event is generated from Intel CPU ME (Management Engine). There are two factors that can cause this event to be triggered, one cause is the processor is hot and the second cause is the system board has received a power throttling signal from the chassis controller. You can check the throttling settings if you do not want to do power throttling. Trap Settings Select the Trap Settings submenu to view and manage the Simple Network Management Protocol (SNMP) trap events. Table 1-21. Trap Settings Items IPv4 Destination List Enable Checkbox IPv4 Address Description Enables or disables an IPv4 destination address. You can enable up to four IPv4 destination addresses. Configure up to four IPv4 addresses. 36