Dell PowerEdge M420 Dell PowerEdge M620 Systems Owner's Manual - Page 57

Installing The Storage Controller Card, Removing and Installing the Storage Controller Card

Get Dell PowerEdge M420 PDF manuals and user guides View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Figure 22. Removing and Installing the Storage Controller Card 1. storage controller card 2. screws (2) 3. tab 4. connector Installing The Storage Controller Card 1. Holding by its edges, position the storage controller card so that the card-connector aligns with the system board connector. 2. Adjust the other end of the card so that the card edge is secured under the two tabs on the plastic bracket. 3. Insert the controller card-connector firmly into the system board connector until the card is fully seated. 4. Install the two screws to secure the storage controller card to the blade system board. 5. Reinstall the system board. 6. Install the blade in the enclosure. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
Figure 22. Removing and Installing the Storage Controller Card
1. storage controller card
2. screws (2)
3. tab
4. connector
Installing The Storage Controller Card
1.
Holding by its edges, position the storage controller card so that the card-connector aligns with the system board
connector.
2.
Adjust the other end of the card so that the card edge is secured under the two tabs on the plastic bracket.
3.
Insert the controller card-connector firmly into the system board connector until the card is fully seated.
4.
Install the two screws to secure the storage controller card to the blade system board.
5.
Reinstall the system board.
6.
Install the blade in the enclosure.
57