Dell PowerEdge M420 Dell PowerEdge M620 Systems Owner's Manual - Page 71
Dell PowerEdge RAID Controller PERC H710, Dual-processor blades with PERC H310 - poweredge m620
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Environmental Expanded Operating Temperature Restrictions Storage Temperature • Do not perform a cold startup below 5 °C. • Maximum 95 W processor is supported. • Dell PowerEdge RAID Controller (PERC) H710/ H710P cards are not supported in dual-processor configurations. • When populating the blade slots in the M1000e enclosure with only PowerEdge M620 blades: - Install only 97 mm wide heat sink(s). - Dual-processor blades with PERC H310 cards cannot be mixed with singleprocessor blades. - If you install a blade with two processors and a PERC H310 card in the M1000e enclosure, all blade slots in the enclosure must have PowerEdge M620 blades with the same configuration (PowerEdge M620 blades with two processors and a PERC H310 card). However, vacant blade slots in the enclosure can be installed with blade blanks. • Non Dell qualified peripheral cards and/or peripheral cards greater than 25 W are not supported. -40 °C to 65 °C (-40 °F to 149 °F) with a maximum temperature gradation of 20 °C per hour. 71