Dell PowerEdge M420 Dell PowerEdge M620 Systems Owner's Manual - Page 90
If unexpected, check presence, then reinstall or reconnect., > cannot detect any hosts.
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Error Code Message Information Action Check presence of the hardware, reinstall or reconnect, then reattempt the update. If the issue persists, see Getting Help. HWC4013 Message Hardware unsuccessfully updated for embedded NIC. Action Check presence, reinstall or reconnect, then reattempt the update. If the issue persists, see Getting Help. HWC4015 Message Details Action Link Tuning error detected. CMC has old firmware. After updating the firmware the CMC will recognize the device. Update the CMC firmware. If the issue persists, see Getting Help. HWC5001 Message Action is offline. If unexpected, check presence, then reinstall or reconnect. HWC5002 Message A fabric mismatch detected on . Details The fabric type for the IOM and mezzanine cards must match. Action Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card. HWC5004 Message Details Action A link tuning failure detected on . CMC has old firmware. After updating the firmware the CMC will recognize the device. Update the CMC firmware. If the issue persists, see Getting Help. HWC5006 Message Action A failure is detected on . If the issue persists, see Getting Help. HWC5008 Message Action Console is not available for the . If the issue persists, see Getting Help. HWC5010 Message Action cannot detect any hosts. If the issue persists, see Getting Help. HWC5014 Message Action is not functional and is powered off. If the issue persists, see Getting Help. HWC5031 Message Details Action IO module is offline. The CMC has powered off the IOM. If the issue persists, see Getting Help. 90