Dell PowerEdge R420 Owner's Manual - Page 97
Power Distribution Board, Removing The Power Distribution Board
View all Dell PowerEdge R420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Power Distribution Board Removing The Power Distribution Board CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. NOTE: The power distribution board is present only in systems that support redundant power supplies. 1. If installed, remove the front bezel. 2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals. 3. Open the system. 4. Remove the power supplies from the system. 5. Remove the PDB shroud. 6. Disconnect the power distribution cables from the system board. 7. Disconnect the fan cable. 8. Remove the two screws securing the power distribution board to the chassis and lift the board out of the chassis. Figure 57. Removing and Installing the Power Distribution Board 97