Dell PowerStore 1200T EMC PowerStore Networking Guide for PowerStore T Models - Page 28
Cable the Management switch, Cable the management ports on the nodes to the Management switch
View all Dell PowerStore 1200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
switchport access vlan 100 exit interface ethernet 1/1/53 description "PowerStoreNodeB_MgmtPort" no shutdown switchport mode access switchport access vlan 100 exit 10. If you will be configuring a File Mobility network, you can perform the switch configuration steps described in Configure the File Mobility network on the Management switch now, or after you have completed initial cluster configuration. 11. Create the port-channel for the uplinks. interface ethernet 1/1/26 description Uplink_Ports no shutdown channel-group 10 mode active no switchport flowcontrol receive off flowcontrol transmit off exit Table 9. Code sample for configuring the Management switch interface port-channel 10 description Uplink no shutdown switchport mode trunk switchport access vlan 1 switchport trunk allowed vlan 100 exit interface ethernet 1/1/25 description Uplink_Ports no shutdown channel-group 10 mode active no switchport flowcontrol receive off flowcontrol transmit off exit interface ethernet 1/1/26 description Uplink_Ports no shutdown channel-group 10 mode active no switchport flowcontrol receive off flowcontrol transmit off exit Cable the Management switch Cable the Management switch to the appliance base enclosure nodes and the management uplink. Examples in this guide demonstrate deploying the PowerStore T model appliance with Dell EMC PowerSwitch S4148-ON switches. Cable the management ports on the nodes to the Management switch The Management switch is connected through the 1 GbE management port on each of the appliance base enclosure nodes. 28 Configuring Dell PowerSwitch Series for Initial Deployment