Dell PowerStore 1200T EMC PowerStore Networking Guide for PowerStore T Models - Page 56
Install the Top-of-Rack switches into the PowerStore T model cabinet
View all Dell PowerStore 1200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
ToR Switch 1 ToR Switch 2 Port 0 Port 1 Port 2 4-port card Port 3 Node A Port 0 Port 1 Port 2 Port 3 I/O Module 0 Port 0 Port 1 Port 2 Port 3 I/O Module 1 Port 3 Port 2 Port 1 Port 0 I/O Module 0 Port 3 Port 2 Port 1 Port 0 I/O Module 1 Port 3 Port 2 Port 1 4-port card Port 0 Node B Appliance Figure 16. Sample network connectivity Identifier Network iSCSI Node Ports Port 2 on I/O Module 0 NVMe/TCP Port 0 on I/O Module 0 Replication and Block Import NAS Port 2 on I/O Module 0 Port 3 on I/O Module 0 and I/O Module 1 File Import Cluster Port 3 on I/O Module 0 and I/O Module 1 Ports 0 and 1 on the 4-port card Description Shared port with Replication and Block Import network. Separated by VLANs. Dedicated port. Shared port with iSCSI network. Separated by VLANs. Configured into an LACP bond. NOTE: The LACP bond can be configured with 2 or 4 ports on each node. The LACP bond in this example is configured with 2 ports on each node. Shares LACP bond with NAS network. NOTE: This sample reuses the NAS network for File Import. Configured into Bond 0. Install the Top-of-Rack switches into the PowerStore T model cabinet Refer to the following documents to install Dell PowerSwitch Series S4148, and S5200F model switches into the PowerStore T model cabinet. Table 22. Dell PowerSwitch Series installation resources Dell EMC PowerSwitch Series Dell EMC PowerSwitch S4100-On Series Installation Guide Link https://www.dell.com/support/manuals/en-us/networking-s4128fon,networking-s4148f-on/s4100f-on-install-pub/two-post-flush-mountinstallation?guid=guid-fcad010b-678e-43d6-b533-d967550969dd 56 Configuring PowerStore T model with Dell PowerSwitch Series S4148 Top-of-Rack switches