Dell PowerStore 1200T EMC PowerStore Networking Guide for PowerStore T Models - Page 62

Validate the switch version and licensing, Table 24. Serial connection settings

Get Dell PowerStore 1200T PDF manuals and user guides View all Dell PowerStore 1200T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Serial Console Port Management Port 3. Open a terminal emulator program, such as PuTTY, on the computer. 4. Configure the serial connection in the terminal emulator program using the following settings. Table 24. Serial connection settings Setting Value Speed(baud) 115200 (9600 for micro-USB port) Data bits 8 Stop bits 1 Parity None Flow control None 5. Connect to the switch using the terminal emulator program. 6. Enter the switch log in credentials. Default username and password are: ● Username: admin ● Password: admin 7. Enter global configuration mode. configure terminal 8. It is recommended that you change the password after logging into the switch for the first time. Use the following command to change the switch password. username admin password role sysadmin Validate the switch version and licensing Before you configure the switch and networks, check the switch operating system version and licensing. If you are required to upgrade your switch OS, or reinstall the switch license see the OS10 Enterprise Edition User Guide for details. 1. Establish a terminal connection to the switch and hit the Enter key after you have connected. 2. Run the command show version to display the OS version. Dell EMC recommends upgrading to the latest release available on Dell Digital Locker (www.dell.com/support/software/). OS10# show version Dell EMC Networking OS10-Enterprise Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved. OS Version: 10.5.x.x Build Version: 10.5.x.x.x Build Time: 2018-09-26T17:20:01-0700 System Type: S4148F-ON Architecture: x86_64 Up Time: 2 weeks 04:34:35 3. Verify that the license was installed on the switches. 62 Configuring PowerStore T model with Dell PowerSwitch Series S4148 Top-of-Rack switches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Serial Console Port
Management Port
3.
Open a terminal emulator program, such as PuTTY, on the computer.
4.
Configure the serial connection in the terminal emulator program using the following settings.
Table 24. Serial connection settings
Setting
Value
Speed(baud)
115200 (9600 for micro-USB port)
Data bits
8
Stop bits
1
Parity
None
Flow control
None
5.
Connect to the switch using the terminal emulator program.
6.
Enter the switch log in credentials. Default username and password are:
●
Username:
admin
●
Password:
admin
7.
Enter global configuration mode.
configure terminal
8.
It is recommended that you change the password after logging into the switch for the first time. Use the following command
to change the switch password.
username admin password <NEW_PASSWORD> role sysadmin
Validate the switch version and licensing
Before you configure the switch and networks, check the switch operating system version and licensing.
If you are required to upgrade your switch OS, or reinstall the switch license see the
OS10 Enterprise Edition User Guide
for
details.
1.
Establish a terminal connection to the switch
and hit the
Enter
key after you have connected.
2.
Run the command
show version
to display the OS version. Dell EMC recommends upgrading to the latest release
available on
Dell Digital Locker (www.dell.com/support/software/)
.
OS10# show version
Dell EMC Networking OS10-Enterprise
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
OS Version: 10.5.x.x
Build Version: 10.5.x.x.x
Build Time: 2018-09-26T17:20:01-0700
System Type: S4148F-ON
Architecture: x86_64
Up Time: 2 weeks 04:34:35
3.
Verify that the license was installed on the switches.
62
Configuring PowerStore T model with Dell PowerSwitch Series S4148 Top-of-Rack switches