Dell PowerSwitch S4820T Configuration Guide for the S4820T System 9.100.0 - Page 499

Figure 74. Organizationally Specific TLV IEEE Organizationally Specific TLVs Eight TLV types have been defined by the IEEE 802.1 and 802.3 working groups as a basic part of LLDP; the IEEE OUI is 00-80-C2. You can configure the Dell Networking system to advertise any or all of these TLVs. Table 51. Optional TLV Types Type Optional TLVs 4 5 6 7 TLV Port description System name System description System capabilities 8 Management address IEEE 802.1 Organizationally Specific TLVs 127 Port-VLAN ID 127 Port and Protocol VLAN ID 127 Protocol Identity IEEE 802.3 Organizationally Specific TLVs 127 MAC/PHY Configuration/Status Description A user-defined alphanumeric string that describes the port. Dell Networking OS does not currently support this TLV. A user-defined alphanumeric string that identifies the system. A user-defined alphanumeric string that identifies the system. Identifies the chassis as one or more of the following: repeater, bridge, WLAN Access Point, Router, Telephone, DOCSIS cable device, end station only, or other. Indicates the network address of the management interface. Dell Networking OS does not currently support this TLV. On Dell Networking systems, indicates the untagged VLAN to which a port belongs. On Dell Networking systems, indicates the tagged VLAN to which a port belongs (and the untagged VLAN to which a port belongs if the port is in Hybrid mode). Indicates the protocols that the port can process. Dell Networking OS does not currently support this TLV. Indicates the capability and current setting of the duplex status and bit rate, and whether the current settings are the result of auto-negotiation. This TLV is not available in the Dell Networking OS implementation of LLDP, but is available and mandatory (non- Link Layer Discovery Protocol (LLDP) 499