Dell PowerSwitch S4820T Configuration Guide for the S4820T System 9.100.0 - Page 650

show vlan private-vlan [community | interface | isolated | primary | primary_vlan | interface interface] • Display primary-secondary VLAN mapping. EXEC mode or EXEC Privilege mode show vlan private-vlan mapping • Set the PVLAN mode of the selected port. INTERFACE switchport mode private-vlan {host | promiscuous | trunk} NOTE: Secondary VLANs are Layer 2 VLANs, so even if they are operationally down while primary VLANs are operationally up, Layer 3 traffic is still transmitted across secondary VLANs. NOTE: The outputs of the show arp and show vlan commands provide PVLAN data. For more information, refer to the Dell Networking OS Command Line Reference Guide. Configuration Task List The following sections contain the procedures that configure a private VLAN. • Creating PVLAN Ports • Creating a Primary VLAN • Creating a Community VLAN • Creating an Isolated VLAN Creating PVLAN ports PVLAN ports are ports that will be assigned to the PVLAN. 1 Access INTERFACE mode for the port that you want to assign to a PVLAN. CONFIGURATION mode interface interface 2 Enable the port. INTERFACE mode no shutdown 3 Set the port in Layer 2 mode. INTERFACE mode switchport 4 Select the PVLAN mode. INTERFACE mode switchport mode private-vlan {host | promiscuous | trunk} • host (isolated or community VLAN port) • promiscuous (intra-VLAN communication port) • trunk (inter-switch PVLAN hub port) Example of the switchport mode private-vlan Command For interface details, refer to Enabling a Physical Interface in the Interfaces chapter. 650 Private VLANs (PVLAN)