Dell PowerSwitch S4820T 9.50.1 Configuration Guide for the S4820T System - Page 572

advertise management-tlv system-capabilities system-description hello 10 no disable Dell(conf-lldp)# Dell(conf-lldp)#exit Dell(conf)#interface gigabitethernet 1/31 Dell(conf-if-gi-1/31)#show config ! interface GigabitEthernet 1/31 no ip address switchport no shutdown Dell(conf-if-gi-1/31)#protocol lldp Dell(conf-if-gi-1/31-lldp)#show config ! protocol lldp Dell(conf-if-gi-1/31-lldp)# Viewing Information Advertised by Adjacent LLDP Agents To view brief information about adjacent devices or to view all the information that neighbors are advertising, use the following commands. • Display brief information about adjacent devices. show lldp neighbors • Display all of the information that neighbors are advertising. show lldp neighbors detail Example of Viewing Brief Information Advertised by Neighbors Dell(conf-if-te-0/3-lldp)#end Dell (conf-if-te-0/3)#do show lldp neighbors Loc PortID Rem Host Name Rem Port Id Rem Chassis Id Te 0/1 - TenGigabitEthernet 0/5 00:01:e8:05:40:46 Te 0/2 - TenGigabitEthernet 0/6 00:01:e8:05:40:46 Dell (conf-if-te-0/3)# Example of Viewing Details Advertised by Neighbors Dell#show lldp neighbors detail Local Interface Te 0/4 has 1 neighbor Total Frames Out: 6547 Total Frames In: 4136 Total Neighbor information Age outs: 0 Total Frames Discarded: 0 Total In Error Frames: 0 Total Unrecognized TLVs: 0 Total TLVs Discarded: 0 Next packet will be sent after 7 seconds The neighbors are given below Remote Chassis ID Subtype: Mac address (4) Remote Chassis ID: 00:01:e8:06:95:3e Remote Port Subtype: Interface name (5) Remote Port ID: TeGigabitEthernet 2/11 Local Port ID: TeGigabitEthernet 1/21 572 Link Layer Discovery Protocol (LLDP)