Dell PowerVault 120T DDS4 User Guide - Page 16

Figure 3-1. Front Panel The Autoloader front panel consists of the following: • A select button / An enter button • A Liquid Crystal Display (LCD) • An eject button • Two lights (LED's): tape present, and busy status The Select Button / The Enter Button The Select button allows you to select any of the cartridges present in the magazine, once the magazine has been inserted into the loader. The number selected is displayed on the LCD. If you press the Select button repeatedly, the display cycles through the cartridges available in the magazine, see Figure 3-1. Once a cartridge has been selected, the Enter button should be pressed for confirmation, and the autoloader will load the selected cartridge into the drive. The Eject Button The Eject button starts the unload process. The drive unloads any currently loaded cartridge , and the loader mechanism returns it to the magazine. The magazine is then ejected, see Figure 3-1. NOTE: The host can disable the Eject button by sending a SCSI PREVENT MEDIA removal command. 3-2 Dell PowerVaullt 120T DDS4 Autoloader User's Guide