Dell PowerVault 120T DDS4 User Guide - Page 6
Introduction - tapes
View all Dell PowerVault 120T DDS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Chapter 1 Introduction Overview The Dell™ PowerVault™ 120T DDS4 Autoloader is a high-capacity data storage cartridge changer using 4mm DAT (Digital Audio Tape) technology. The tape autoloader achieves high data reliability through read-after-write and an additional level of error correction code (ECC). The tape autoloader stores data on tape using a standard format called DDS (Digital Data Storage), DDSDC, DDS2, DDS3 and DDS4. This format is used by numerous other DDS tape drive manufacturers, providing a broad range of compatible tape drives. The tape autoloader is fully READ and WRITE compatible with the DDS4, DDS3, DDS2, DDS and DDSDC format tapes. Features The tape autoloader has the following features: • Data capacity 160 (native) to 320 GB (typical)* • Transfer rate (sustained) ~ 2.4 (native) to 4.7 MB/sec (typical)* • 8 cartridge tape magazine • Compatibility with SCSI-2 medium changer command set • 80 seconds maximum to swap a tape cartridge • High reliability, with a mean failure rate of less than 1 failure in 100,000 cartridge swaps • Supported formats: DDS4, DDS3, DDS2, DDS, DDSDC • High burst transfer rate -14 MB/sec asynchronous / 40 MB/sec synchronous • Large 10 MB buffer • 5.25-inch half height • Embedded wide ultra SE/LVD SCSI interface • Supports variable or fixed record length Dell PowerVault 120T DDS4 Autoloader User's Guide 1-1