Dell PowerVault MD1220 Hardware Owner's Manual - Page 41
Installing a Power Supply/Cooling Fan Module
![]() |
View all Dell PowerVault MD1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installing a Power Supply/Cooling Fan Module 1 Slide the power supply/cooling fan module into the chassis until it is fully seated and the release tab clicks into place. See Figure 3-9. 2 Connect the power cable to the power supply/cooling fan module and plug the cable into a power outlet. 3 Secure the power cable using the Velcro strap. See Figure 3-10. Figure 3-10. Securing the Power Cable 1 1 Velcro strap CAUTION: When connecting the power cable, secure the cable with the Velcro strap. NOTE: If the enclosure is powered on, all the power supply LEDs remain off until the AC power cable is connected to the power supply/cooling fan module and the power switch is turned on. 4 Turn on the power supply/cooling fan module. Installing Enclosure Components 41
![](/manual_guide/products/dell-powervault-md1220-hardware-owners-manual-aadde59/41.png)