Dell PowerVault MD1220 Hardware Owner's Manual - Page 47
Installing the Backplane, Supply/Cooling Fan Module
View all Dell PowerVault MD1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Installing the Backplane 1 Align the holes on the backplane with the holes on the enclosure. 2 Tighten the captive screw to secure the backplane to the chassis. See Figure 3-14 for PowerVault MD1200 or Figure 3-15 for PowerVault MD1220. 3 Replace the screws that secure the backplane to the chassis. See Figure 3-14 for PowerVault MD1200 or Figure 3-15 for PowerVault MD1220. 4 Align the slots on the EMM/power supply cage with the tabs on the chassis. See Figure 3-13. 5 Push the EMM/power supply cage toward the front of the enclosure. 6 Replace the screws that secure the EMM/power supply cage to the chassis. 7 Replace the control panel. See "Installing the Control Panel" on page 44. 8 Replace the power supply/cooling fan modules. See "Installing a Power Supply/Cooling Fan Module" on page 41. 9 Replace the hard drives. See "Installing a Hard Drive" on page 32. 10 Connect all the cables to the enclosure. 11 Turn on the enclosure and the host server. Installing Enclosure Components 47