Dell PowerVault MD3000i Hardware Owner's Manual - Page 20
One SAS Out port connector, PowerVault, MD3000i Installation Guide - iscsi raid controller
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
• Eleven LEDs (two iSCSI In link speed/activity, two iSCSI In link duplex mode, two Ethernet link/speed, battery fault, SAS link fault/connectivity, cache active, controller fault, and controller power) • One SAS Out port connector • Debug port For a description of each component on the front panel of the RAID controller module, see Table 1-4. For an explanation of how to connect the enclosure using the RAID controller module ports, see the PowerVault MD3000i Installation Guide. Figure 1-5. RAID Controller Module External Panel (front view) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Table 1-4. RAID Controller Module Component Functions Item Component Icon 1 iSCSI In Port 0 Link Speed/Activity Status LED 2 iSCSI In Port 0 In-0 3 iSCSI In Port 0 Link Duplex Mode Function Green: Link is operating at 1000 Mbps. Amber: Link is operating at 100 Mbps. Off: iSCSI connection is not active. Provide host-to-controller iSCSI connection. If LED is solid, there is no activity on the link. If the LED is blinking, there is activity on the link. Green: Full-duplex mode. Off: Half-duplex mode. NOTE: Half-duplex mode is supported only if the link speed is 100Mbps. 20 About Your System