Dell PowerVault MD3000i Hardware Owner's Manual - Page 69
the midplane from the control panel and lift it out of the enclosure see,
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 3-8. Removing and Replacing the Controller/Power Supply Cage 1 2 1 Phillips screws (4) 2 controller/power supply cage 5 Slide the controller/power supply cage out of the enclosure and place it aside. 6 Reaching into the enclosure chassis from the back, carefully disconnect the midplane from the control panel and lift it out of the enclosure (see Figure 3-9). 7 To re-install the midplane, reverse the previous steps. Installing Enclosure Components 69
Installing Enclosure Components
69
Figure 3-8.
Removing and Replacing the Controller/Power Supply Cage
5
Slide the controller/power supply cage out of the enclosure and place it
aside.
6
Reaching into the
enclosure
chassis from the back, carefully disconnect
the midplane from the control panel and lift it out of the enclosure (see
Figure 3-9).
7
To re-install the midplane, reverse the previous steps.
1
Phillips screws (4)
2
controller/power supply cage
2
1