Dell PowerVault MD3000i Hardware Owner's Manual - Page 55
Installing Enclosure Components, Recommended Tools, Removing and Replacing the Front Bezel - battery replacement
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installing Enclosure Components This section explains how to install the following components: • Front bezel (optional) • Physical disks and disk carriers • RAID controller modules • Battery backup unit • Power supplies • Control panel • Enclosure midplane Recommended Tools The procedures in this section require the use of one or more of the following tools: • #2 Phillips-head screwdriver • Torx T10 driver • Wrist grounding strap, as explained in the safety instructions found in your Product Information Guide Removing and Replacing the Front Bezel To access the physical disks in your enclosure, you must remove the optional front enclosure bezel. If your enclosure does not have this bezel, skip this section. To remove the bezel: 1 If the bezel is locked, insert the bezel locking key in the bezel lock. If the bezel is unlocked, go to step 3. 2 Turn the key to the left to unlock the bezel. 3 Push inward on the release tab on the bezel and lift it away from the enclosure front (see Figure 3-1). Installing Enclosure Components 55