Dell PowerVault MD3000i Hardware Owner's Manual - Page 53
Physical Disk Firmware, Expansion Enclosure Firmware, using the MD Storage Manager.
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
optimal. Downloading firmware when either or both controllers are nonoptimal may result in unsynchronized firmware and cause you to have to run the download again after restoring the RAID controller module(s) to optimal condition. If a RAID controller is replaced and its firmware does not match the version on the non-replaced RAID controller, the non-replaced controller will automatically flash the replacement controller with its firmware version to ensure that both controllers have the same firmware version. NVSRAM Update NVSRAM packages specify the internal settings for the storage array RAID controller modules. These internal settings cannot be modified except by an NVSRAM update. You can download RAID controller module firmware and NVSRAM packages separately or together using MD Storage Manager. Physical Disk Firmware NOTE: Dell recommends stopping all I/O to the array when downloading physical disk firmware. You can also download physical disk packages containing the latest firmware files. Ensure that the firmware files you select are compatible with the physical disks. Before downloading firmware, you should back up all your data. In addition, do not make any configuration changes to the storage array, such as creating virtual disks or defining host servers, during the download. Doing so could cause the firmware download to fail and prevent access to the physical disks. Expansion Enclosure Firmware You can download firmware updates for your MD1000 expansion enclosures using the MD Storage Manager. Using Your RAID Enclosure 53