Dell PowerVault TL2000 Dell Model TL2000/TL4000 Tape Library- User's Guide - Page 250
TableC-2. LTO Tape Drive Sense Data continued, Additional Sense Code Qualifier ASCQ Continued
View all Dell PowerVault TL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Table C-2. LTO Tape Drive Sense Data (continued) Bit Address or Name Byte 7 6 5 4 3 2 1 0 12-13 Additional Sense Code (ASC) - Additional Sense Code Qualifier (ASCQ) (Continued) Byte 12 Byte 13 ASC ASCQ 27 00 - Write Protect - A Write type operation has been requested on a cartridge which has been write protected 28 00 - Not Ready to Ready Transition - A cartridge has been loaded successfully into the drive and is now ready to be accessed 28 01 - Import or export element accessed 29 00 - Reset - The drive has powered on, received a reset signal or a bus device reset signal since the initiator last accessed it 29 04 - Device internal reset 2A 01 - Mode Parameters Changed - The Mode parameters for the drive have been changed by an initiator other than the one issuing the command 2C 00 - Command sequence error 2C 0B - Not reserved - The OIR bit of the sequential access device page is set and the I-T nexus attempting to communicate with the drive does not hold a reservation. 2F 00 - Commands cleared by another initiator 30 00 - Incompatible Media Installed - A write type operation could not be executed because it is not supported on the cartridge type that is loaded. 30 01 - Unknown Format - An operation could not be carried out because the cartridge in the drive is of a format not supported by the drive 30 02 - Incompatible Format - An operation could not be completed because the Logical Format is not correct 30 03 - Cleaning Cartridge Installed - An operation could not be carried out because the cartridge in the drive is a cleaning cartridge 30 05 - Cannot write medium, incompatible format 30 07 - Cleaning Failure - A cleaning operation was attempted, but could not be completed for some reason 30 0C - Data Protect - WORM overwrite attempted. The drive rejected a write operation because it would have resulted in an overwrite. Overwrite is not allowed on WORM media. 30 0D - Medium Error - WORM integrity check. The drive rejected a Read or Write operation because the cartridge is a suspicious WORM cartridge. 31 00 - Media format corrupted - Data could not be read because the format on tape is not valid, but is a known format. A failure occurred attempting to write the FID 37 00 - Rounded parameter - A Mode Select command parameter has been rounded because the drive can not store it with the accuracy of the command. 3A 00 - Media Not Present - A media access command has been received when there is no cartridge loaded 3B 00 - Sequential Positioning Error - A command has failed and left the logical position at an unexpected location 3B 0C - Position past beginning of medium 3D 00 - Invalid bits in identify Message - An illegal Identify Message has been received at the drive at the start of a command 3E 00 - Logical Unit has not Self-Configured - The drive has just powered on and has not completed its self test sequence and can not process commands 3F 01 - Code Download - The firmware in the drive has just been changed by a Write Buffer command 3F 03 - Inquiry data has changed 3F 0E - Reported LUNs data has changed 3F 0F - Echo buffer overwritten 40 xx - Diagnostic failure - A diagnostic test has failed. The xx (ASCQ) is a vendor specific code indicating the failing component. C-8 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide