Dell PowerVault TL2000 Dell Model TL2000/TL4000 Tape Library- User's Guide - Page 88
Verifying the Connection, Cartridge Magazines, 2U Library Cartridge Magazines - tape library manual
View all Dell PowerVault TL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
3. Install a suitably rated HBA. Remember that if there are any single-ended (SE) devices on the same SCSI bus, the entire SCSI bus will negotiate down to SE speed and severely degrade performance and limit cable length. 4. Make sure that LUN scanning is enabled on the SCSI host adapter. 5. Make sure that Fibre Channel Tape Support is enabled on the Fibre Channel HBA if installing a library with a Fibre Channel drive. 6. Make sure that SAS support is enabled on the SAS HBA if installing a library with a SAS drive. Verifying the Connection 1. Depending on the server configuration, you may need to change the SCSI ID, SAS, or Fibre Channel Loop ID of the library, if the current ID is the same as another device on the bus. 2. When the host server is powered ON, install the software and/or driver(s) that are compatible with the library. Backup software packages may require additional software or licensing to communicate with the library accessor. 3. If this is a SCSI attachment, ensure the library is properly terminated. If the library is the only SCSI device, other than the SCSI host adapter on the selected SCSI bus, it must be terminated. Likewise, if the library is physically the last SCSI device on the SCSI bus, it must be terminated. Only the devices physically located at the beginning and end of the SCSI bus should be terminated. 4. Confirm that the host server operating system recognized the library. In Microsoft® Windows® XP or Windows Server 2003, you can verify this by going to: Settings → Control Panel → System → Hardware → Device Manager → Tape Drive and/or Medium Changer . For more information on verifying the connection of SCSI devices, consult the operating system documentation. Cartridge Magazines The library has removable magazines. Magazine access is password protected. For safety reasons, the accessor motion is stopped when a magazine is removed. The magazines can be released using the Operator Control Panel or the Web User Interface. In case the Operator Control Panel or Web User Interface initiated process has failed or the library no longer has power, a manual emergency release is available. Important: To manually release a magazine, see "Releasing the Magazines Manually" on page 9-1. This manual process should only be used if the magazine cannot be released using the Operator Control Panel or the Web User Interface. 2U Library Cartridge Magazines The 2U library has two cartridge magazines. The left cartridge magazine (see Figure 4-33 on page 4-33) has eleven storage slots and houses the elective 1-slot I/O Station. The right magazine (see Figure 4-34 on page 4-33) has twelve storage slots. For information about Element Addressing, see "2U Library I/O Slot, Storage Slots and Drive Slot Element Addresses and Physical Locations" on page A-1. 4-32 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide