Dell PowerVault TL2000 Dell Model TL2000/TL4000 Tape Library- User's Guide - Page 35
Product Environment, Supported Device Drivers
View all Dell PowerVault TL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Product Environment The library is designed to operate in a general business environment. The library meets the acoustical requirements for general business area category 2D. Category 2D states that the library should be installed a minimum of 4 m (13 ft.) from a permanent work station. To allow for service access, install the library a minimum of 0.9 m (3 ft.) from all obstacles. The library is a precision computer peripheral. To ensure maximum longevity of your library, locate the library away from dust, dirt, and airborne particulates: v Keep the library away from high-traffic areas, especially if the floor is carpeted. Carpeting harbors dust and people walking on the carpet can cause the carpet fibers and the dust to become airborne. v Keep the library out of printer/copier rooms because of toner and paper dust. Additionally, do not store paper supplies next to the library. v Keep the library away from moving air caused by doorways, open windows, fans, and air conditioners. Ensure that the machine covers are always kept closed to minimize any contamination from airborne particles. Supported Device Drivers The latest levels of device drivers can be downloaded by visiting http://support.dell.com. Note: The TL2000 and TL4000 libraries utilize the generic SCSI drivers in RHEL 4 and 5. Depending on the ISV you are using, you will use either the sg or st driver. Please refer to your ISV documentation for more information on which driver to use. Chapter 1. Product Description 1-13