Dell PowerVault TL2000 Dell Model TL2000/TL4000 Tape Library- User's Guide - Page 28

refer to Multiple Key Managers for Redundancy of the Dell - eject tape

Page 28 highlights

CAUTION: The library must be offline from any user and all media must be removed from the drives before license keys are installed or any configuration modifications are made. Please refer to "Power ON/OFF" on page 2-4 and "Removing Cartridges from Magazine Slots" on page 9-1 for instructions to take the library offline and to eject media from the drives. To prevent possible data loss due to an EKM server failure, Dell recommends the use of a primary and secondary EKM server. This configuration provides redundancy in the event the primary EKM server is down or unavailable. Please refer to Chapter 2 (Multiple Key Managers for Redundancy) of the Dell Encryption Key Manager User's Guide and to "Configure Library: Encryption" on page 5-47 for information on configuring a primary and secondary EKM for your library. If the backup job fails due to an EKM server failure, the job recovers if connectivity is restored to the EKM server prior to expiration of the timeout set in the tape backup software application. Enabling library-managed encryption on a PowerVault TL2000 or TL4000 is a 6 step process. 1. Upgrade the library and drive firmware to the latest versions. The firmware can be found at http://support.dell.com. 2. Enable library-managed encryption on the library via the license key if not already licensed. Please refer to "Configure Library: Encryption" on page 5-47 for activation instructions. If you purchased library-managed encryption at the time you purchased your library, a hard copy of the license key is provided with your library as a backup. If there are any issues with the license key for library-managed encryption purchased with the library, please visit http://www.dell.com/ tapeautomation to obtain your license key. You will need the library serial number and worldwide node name to obtain the license key. Please refer to the following tables in this document for instructions on locating this information: v Table 1.2 for library serial number v Table 5.6 for library worldwide node name If this does not resolve your issue, please contact Dell technical support. 3. Configure library-managed encryption on your library. Please refer to "Configure Library: Encryption" on page 5-47 for instructions. 4. Install the Dell Encryption Key Manager (EKM) application on the server designated for EKM. Please refer to Chapter 3.0 of the Dell Encryption Key Manager User's Guide for instructions. This document can be found at http://support.dell.com. 5. Configure the EKM application. Please refer to Chapter 4.0 of the Dell Encryption Key Manager User's Guide for instructions. 6. Start the EKM application. Please refer to Chapter 5.0 of the Dell Encryption Key Manager User's Guide for instructions. Note: All encryption settings should be configured or re-verified in the drive after any library or drive reset. This is because a new drive may have been added or an existing drive may have been swapped with another drive. 1-6 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283

CAUTION:
The library must be offline from any user and all media must be
removed from the drives before license keys are installed or any
configuration modifications are made. Please refer to “Power ON/OFF”
on page 2-4 and “Removing Cartridges from Magazine Slots” on page
9-1 for instructions to take the library offline and to eject media from
the drives.
To prevent possible data loss due to an EKM server failure, Dell recommends
the use of a primary and secondary EKM server. This configuration provides
redundancy in the event the primary EKM server is down or unavailable. Please
refer to Chapter 2 (Multiple Key Managers for Redundancy) of the Dell
Encryption Key Manager User's Guide and to “Configure Library: Encryption”
on page 5-47 for information on configuring a primary and secondary EKM for
your library.
If the backup job fails due to an EKM server failure, the job recovers if
connectivity is restored to the EKM server prior to expiration of the timeout set
in the tape backup software application.
Enabling library-managed encryption on a PowerVault TL2000 or TL4000 is a 6
step process.
1.
Upgrade the library and drive firmware to the latest versions. The firmware
can be found at
.
2.
Enable library-managed encryption on the library via the license key if not
already licensed. Please refer to “Configure Library: Encryption” on page 5-47
for activation instructions.
If you purchased library-managed encryption at the time you purchased your
library, a hard copy of the license key is provided with your library as a
backup. If there are any issues with the license key for library-managed
encryption purchased with the library, please visit
tapeautomation
to obtain your license key. You will need the library serial
number and worldwide node name to obtain the license key. Please refer to the
following tables in this document for instructions on locating this information:
v
Table 1.2 for library serial number
v
Table 5.6 for library worldwide node name
If this does not resolve your issue, please contact Dell technical support.
3.
Configure library-managed encryption on your library. Please refer to
“Configure Library: Encryption” on page 5-47 for instructions.
4.
Install the Dell Encryption Key Manager (EKM) application on the server
designated for EKM. Please refer to Chapter 3.0 of the
Dell Encryption Key
Manager User's Guide
for instructions. This document can be found at
.
5.
Configure the EKM application. Please refer to Chapter 4.0 of the
Dell
Encryption Key Manager User's Guide
for instructions.
6.
Start the EKM application. Please refer to Chapter 5.0 of the
Dell Encryption Key
Manager User's Guide
for instructions.
Note:
All encryption settings should be configured or re-verified in the drive after
any library or drive reset. This is because a new drive may have been added
or an existing drive may have been swapped with another drive.
1-6
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide