Dell Precision 7920 Tower Owners Manual - Page 103
System configuration
View all Dell Precision 7920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Option UEFI Boot Path Security System configuration Table 6. System Configuration Option Integrated NIC Integrated NIC 2 UEFI Network Stack Serial Port SATA Operation 7920 Tower Drives Description Allows you to control whether the system prompts the user to enter the Admin password when booting to a UEFI boot path. Click one of the following options: • Always, Except Internal HDD-Default • Always • Never Description Allows you to configure the integrated network controller. The options are: • Enable UEFI Network Stack • Disabled NOTE: You can use the Disabled option, only if Active Management Technology (AMT) option is disabled. • Enabled • Enabled w/PXE (Default) Allows you to configure the integrated network controller. The options are: • Enabled (Default) • Enabled w/PXE NOTE: This feature is supported only on Tower 7920. Allows pre-OS and early OS networking features to use any enabled NICs. • Enabled UEFI Network Stack This option is set by default. Identifies and defines the serial port settings. You can set the serial port to: • Disabled • COM1 (Default) • COM2 • COM3 • COM4 NOTE: The operating system may allocate resources even if the setting is disabled. Allows you to configure the internal SATA hard-drive controller. The options are: • Disabled • AHCI • RAID-On (Default) NOTE: SATA is configured to support RAID mode. System Setup 103