Dell Precision 7920 Tower Owners Manual - Page 73
Installing the memory module, Coin cell battery, Removing the coin cell battery
View all Dell Precision 7920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Installing the memory module 1. Align the notch on the memory module with the tab on the memory module connector. 2. Insert the memory module into the memory module slot. 3. Press the memory module firmly until the retention tabs click into place. NOTE: Do not pull the retention levers up. Always press down firmly on the module until the levers lock into place unassisted. 4. Install the: a) air shroud b) side cover 5. Follow the procedure in After working inside your computer Coin cell battery Removing the coin cell battery 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) side cover b) graphical processing unit(GPU) c) air shroud 3. To remove the coin cell battery: a) Press the release latch [1] away from the battery to allow the battery to pop-up from the socket [2]. Removing and installing components 73