Dell Precision 7920 Tower Owners Manual - Page 76
Removing the CPU
View all Dell Precision 7920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Removing the CPU 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) side cover b) air shroud c) processor heat sink module 3. To remove the central processing unit (CPU): a) Hold the processor heat sink module upside down. b) Pry the two processor carrier latchs [1] from the processor heat sink module. c) Press the other two carrier latchs [2] of the processor carrier and remove it from the slot in the heat sink. d) Use a torx screwdriver to pry the CPU off the processor heat sink module. Place the blade between the clip and the CPU. NOTE: A flatbed screwdriver or plastic scribe can also be used as well. e) Unlatch the CPU from the two keying latches on the processor carrier and gently lift the CPU. NOTE: Avoid touching the CPU contacts with your fingers. 76 Removing and installing components