Dell Precision 7920 Tower Owners Manual - Page 18
Power supply unit (PSU), Removing the PSU, Installing the PSU, Side cover, Removing the side cover
![]() |
View all Dell Precision 7920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Power supply unit (PSU) Removing the PSU 1. Follow the procedure in Before working inside your computer. 2. Disconnect the power cable from the system. 3. Press the PSU release latch [1] and slide the power supply away from the system [2]. NOTE: If the PSU cannot be removed then remove the right side cover of the system and check if the PSU is secured with a screw. Installing the PSU 1. Slide in the power supply unit to the PSU slot on the system. 2. Connect the power cable to the system. 3. Follow the procedure in After working inside your computer Side cover Removing the side cover 1. Follow the procedure in Before working inside your computer. CAUTION: The system will not power on while the side cover is off. Also, the system will shut down if the side cover is removed while the system is on. 2. To remove the side cover: 3. Press the latch 18 Removing and installing components
![](/manual_guide/products/dell-precision-7920-tower-owners-manual-04364ef/18.png)