Dell S3100 EMC Command Line Reference Guide for the Series 9.14.1.5 - Page 1128

Version 7.6.1.0 7.5.1.0 pre-6.2.1.0 Description Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. spanning-tree msti Configure multiple spanning tree instance cost and priority for an interface. Syntax Parameters spanning-tree msti instance {cost cost | priority priority} msti instance cost cost Enter the keyword msti and the MST instance number. The range is from zero (0) to 63. (OPTIONAL) Enter the keyword cost then the port cost value. The range is from 1 to 200000. The defaults are: • 100 Mb/s Ethernet interface = 200000 • 1-Gigabit Ethernet interface = 20000 • 10-Gigabit Ethernet interface = 2000 • Port Channel interface with one 100 Mb/s Ethernet = 200000 • Port Channel interface with one 1 Gigabit Ethernet = 20000 • Port Channel interface with one 10 Gigabit Ethernet = 2000 • Port Channel with two 1 Gigabit Ethernet = 18000 • Port Channel with two 10 Gigabit Ethernet = 1800 • Port Channel with two 100 Mbps Ethernet = 180000 priority priority Enter keyword priority then a value in increments of 16 as the priority. The range is from 0 to 240. The default is 128. Defaults • cost = depends on the interface type • priority = 128 Command Modes Command History INTERFACE This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. 1128 Multiple Spanning Tree Protocol (MSTP)