Dell S3100 EMC Command Line Reference Guide for the Series 9.14.1.5 - Page 61

stack-unit-number default primary secondary system: ftp: nfsmount system: usbflash tftp: A: | B: bmp-boot Enter the stack-unit number. The range is from 1 to 12. Enter the keyword default to specify the default Dell EMC Networking OS image. Enter the keyword primary to specify the primary Dell EMC Networking OS image. Enter the keyword secondary to specify the secondary Dell EMC Networking OS image. Enter the keyword system: to use the system image file URL (system). Enter the keyword FTP: to retrieve the image from an FTP server. ftp:// userid:password@hostip/filepath. Enter the keyword nfsmount: to retrieve the image from a mounted NFS file system. nfsmount://filepath Enter the keyword system: to retrieve the image from the system. Enter the keyword usbflash: to retrieve the image from the USB flash memory. usbflash://filename. Enter the keyword TFTP: to retrieve the image from a TFTP server. tftp://hostip/ filepath. Enter A: or B: to boot one of the system partitions. Enter the keywords bmp-boot to boot the system from the image present in the DHCP offer. NOTE: In normal-reload, this keyword is not enabled. Defaults Command Modes Command History Not configured. CONFIGURATION This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 8.3.19.0 8.3.11.1 8.3.7.0 Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced the support for bmp-boot on the S-Series and Z-Series switches. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Usage Information To display these changes in the show bootvar command output, save the running configuration to the startup configuration (using the copy command) and reload system. File Management 61