Dell S3100 EMC Command Line Reference Guide for the Series 9.14.1.5 - Page 1561

Parameters method-list-name default Enter the keywords method-list-name to specify that method list, created in the aaa authentication login command, to be applied to the designated terminal line. Enter the keyword default to specify that the default method list, created in the aaa authentication login command, is applied to the terminal line. Defaults Command Modes Command History No authentication is performed on the console lines. Local authentication is performed on the virtual terminal and auxiliary lines. LINE This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.6.0.0 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 pre-6.2.1.0 Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Revised introductory and usage guidelines description. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information If you configure the aaa authentication login default command, the login authentication default command automatically is applied to all terminal lines. When configuring authentication, consider the following: • If you configure the default authentication list using the default keyword, the list applies it to all the local and remote connections globally, unless you have specified some another authentication list for a specific connection. • If you configure an authentication lists other than default, you must apply those authentication lists to each connection. Security 1561