Dell S3100 EMC Command Line Reference Guide for the Series 9.14.1.5 - Page 1660

Example • A minimum of one special character including a space If your password does not meet the criteria, the system does not accept your password. If you use encryption type 9, the system stores the clear text password in an inaccessible location on the system. The show running-configuration command does not display the password. This configuration is not portable between different systems. DellEMC)# show running-config | g root root-access password 7 f4dc0cb9787722dd1084d17f417f164cc7f730d4f03d4f0215294cbd899614e3 verified boot Enable OS image hash validation during system startup. Syntax verified boot To disable OS image hash validation, use the no verified boot command. Defaults Command Modes Command History Not configured CONFIGURATION Version 9.14(1.0) 9.14(0.0) 9.13(0.0) Description Introduced on the S4810 and S4820T. Introduced on the S5048F-ON. Introduced on the S3100 series, S3048-ON, S4048-ON, S4048T-ON, S5000, S6000, S6000-ON, S6010-ON, S6100-ON, Z9100-ON, MXL, and FN-IOM. Usage Information When you reboot the system using the reload command, the system performs OS image verification on the primary boot image. You can enable boot image hash validation only for images on local flash partitions such as A: or B:. Example DellEMC(config)# verified boot verified boot hash Verify and store the hash value of the startup configuration. Syntax verified boot hash {system-image {A: | B:} | startup-config} hash value Parameters system-image {A: | B:} startup-config Enter the keyword system-image and A: or B:, depending on where the image is stored and then the hash value that is present on the iSupport page for your image. Enter the keyword startup-config and then the hash value for the startup configuration. You can get the hash value for the startup configuration using the generate hash command. 1660 Security