Dell S3100 EMC Command Line Reference Guide for the Series 9.14.1.5 - Page 1379

Defaults Command Modes Command History None EXEC This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC Networking OS Command Line Reference Guide. The following is a list of the DellEMC Networking OS version history for this command. Version 9.10(0.0) 9.10(0.0) 9.8(2.0) Description Introduced on the S3148. Increased the stacking range to 12 units in S3100 series. Introduced on the S3100 series. Example DellEMC#show power detail stack-unit 1 Unit Total System Redundancy Inline Inline Inline Inline Inline Power Power Power Power Power Power Power Power Available Consumed Consumed Threshold Available Allocated Consumed Remaining (Watts) (Watts) (Watts) (%) (Watts) (Watts) (Watts) (Watts) 1 1100 150 0 10 95 0 0 95 DellEMC# show power inline You can use this command to display the PoE power allocation on a specified stack unit or on an interface. Syntax show power inline {stack-unit unit number | interface interface SLOT/PORT [/ SUBPORT] } Parameters stack-unit unit number Enter the keyword stack-unit and the stack unit number Range is from 1 to 12. interface interface SLOT/PORT [/ SUBPORT] Enter the interface keyword, and specify the interface type followed by the SLOT/ PORT [/SUBPORT] numbers. Defaults Command Modes None • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant DellEMC Networking OS Command Line Reference Guide. The following is a list of the DellEMC Networking OS version history for this command. Version 9.10(0.0) 9.10(0.0) 9.8(2.0) Description Introduced on the S3148. Increased the stacking range to 12 units in S3100 series. Introduced on the S3100 series. Power over Ethernet (PoE) 1379