Dell S3100 EMC Command Line Reference Guide for the Series 9.14.1.5 - Page 45

% Warning: The following users are currently configuring the system: User "" on line console0 User "admin" on line vty0 ( 123.12.1.123 ) User "admin" on line vty1 ( 123.12.1.123 ) User "Irene" on line vty3 ( 123.12.1.321 ) DellEMC#conf When another user enters CONFIGURATION mode, Dell EMC Networking OS sends a message similar to the following: % Warning: User "admin" on line vty2 "172.16.1.210" is in configuration In this case, the user is "admin" on vty2. Obtaining Help As soon as you are in a Command mode, there are several ways to access help: To obtain a list of keywords at any command mode: To obtain a list of keywords with a brief functional description: To obtain a list of available options: To obtain a list of partial keywords using a partial keyword: Example Type a ? at the prompt or after a keyword. There must always be a space before the ?. Type help at the prompt. Type a keyword, and then enter a space and a ?. Type a partial keyword, and then enter a ?. The following is an example of entering ip ? at the prompt: DellEMC(conf)#ip ? access-list as-path community-list control-plane dhcp domain-list domain-lookup domain-name ecmp ecmp-group extcommunity-list ftp helper-address host http icmp igmp max-frag-count mroute msdp multicast-limit multicast-msdp multicast-routing name-server pim prefix-list radius redirect-list route route-export route-import scp source-route ssh tacacs Named access-list BGP autonomous system path filter Add a community list entry Control plane configuration DHCP configuration commands Domain name to complete unqualified host name Enable IP Domain Name System hostname translation Define the default domain name Weighted Ecmp Configuration ECMP Group Configuration Add a Extended community list entry FTP configuration commands DHCP relay agent configuration Add an entry to the ip hostname table HTTP configuration commands ICMP configuration commands Internet Group Management Protocol Max. fragmented packets allowed in IP re-assembly Multicast routes and counters Multicast source discovery protocol Max entries in Multicast TIB Enable IP multicast MSDP protocol Enable IP multicast forwarding Specify addess of name server to use Protocol Independent Multicast Build a prefix list Interface configuration for RADIUS Named redirect-list Establish static routes Export routes Import routes SCP configuration commands Process packets with source routing header options SSH configuration commands Interface configuration for TACACS+ CLI Basics 45