Dell S5224F-ON EMC PowerSwitch S5200F-ON Series Installation Guide February 20 - Page 54
USB storage mount, Before you install an OS, Grub bootloader example
![]() |
View all Dell S5224F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
● 115200 baud rate ● No parity ● 8 data bits ● 1 stop bit ● No flow control USB storage mount USB storage does not automatically mount. USB storage supports the FAT file system. To use USB storage, first mount the device using the following steps: 1. Start up the switch. 2. Press Enter on the ONIE rescue mode menu option from the ONIE Grub boot loader. 3. Create a mount directory for the USB storage. ONIE:/ # mkdir /mnt/usb 4. View the fixed disks using the fdisk command. ONIE:/mnt # fdisk -l For internal storage: Disk /dev/sda: 15.8 GB, 15829303296 bytes 255 heads, 63 sectors/track, 1924 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot /dev/sda1 Start 1 End 1925 Blocks Id System 15458303+ ee EFI GPT For USB storage: Disk /dev/sdb: 30.9 GB, 30942946304 bytes 64 heads, 32 sectors/track, 29509 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Device Boot Start End Blocks Id System 5. Mount the device /dev/sdb to the /mnt/usb directory. ONIE:/ # mount -t vfat /dev/sdb /mnt/usb NOTE: If the /mnt/usb directory is missing, the following message displays: mount: mounting /dev/sdb on /mnt/usb failed: No such file or directory. NOTE: If the USB device is not seen, the following message displays: mount: mounting /dev/sdb on /mnt/usb failed: No such device or address. Before you install an OS After powering on the S5200F-ON Series switch, it goes through a power-on self-test (POST). POST runs every time the switch is initialized and checks the hardware components to determine if the switch is fully operational before booting. After POST, the switch uses the Grub bootloader. To select an entry, use the up and down arrow keys. Press Enter to select an OS or enter e to edit the commands before booting. Enter c for a command line. The selected entry runs automatically in the operating system. Grub bootloader example GNU GRUB version 2.02~beta2+e4a1fe391 54 Management ports
![](/manual_guide/products/dell-s5212fon-emc-powerswitch-s5200fon-series-installation-guide-2022-7069ac6/54.png)