Dell S5248F-ON EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7 - Page 19
Switch configuration prerequisites
View all Dell S5248F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
6 Switch configuration prerequisites 6.1 6.2 Check switch OS version S5248F-ON switches must be running SmartFabric OS10.5.0.0 or later. Run the show version command to check the OS version. Dell EMC recommends upgrading to the latest release available on Dell Digital Locker (account required). OS10# show version S5248F-ON# show version Dell EMC Networking OS10-Enterprise Copyright (c) 1999-2019 by Dell Inc. All Rights Reserved. OS Version: 10.5.0.0 Build Version: 10.5.0.0.326 Note: Figure 1 at the beginning of this guide lists supported switches and operating systems for VxRail deployments. Verify license installation Run the command show license status to verify license installation. The License Type: field should indicate PERPETUAL. If an evaluation license is installed, licenses purchased from Dell EMC are available for download on Dell Digital Locker. Installation instructions are provided in the Dell EMC SmartFabric OS10 User Guide Release 10.5.0. OS10# show license status System Information Vendor Name : Dell EMC Product Name : S5248F-ON Hardware Version: A01 Platform Name : x86_64-dellemc_s5200f_c3538-r0 PPID : CN00Y2VTCES0082O0018 Service Tag : D8MCG02 License Details Software : OS10-Enterprise Version : 10.5.0.0 License Type : PERPETUAL License Duration: Unlimited License Status : Active License location: /mnt/license/D8MCG02.lic Note: If SmartFabric OS10 was factory installed, a perpetual license is already on the switch. 19 Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7