Dell S5248F-ON EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7 - Page 47

Verify the settings with the following command: S5248F-Leaf1A(conf-pg-1/1/3)# do show port-group Port-group port-group1/1/1 port-group1/1/2 port-group1/1/3 (Output truncated) Mode Eth 25g-4x Eth 25g-4x Eth 10g-4x Ports FEM 1 2 3 4 - 5 6 7 8 - 9 10 11 12 - The four interfaces in port-group1/1/3 are now set to 10GbE. Note: The mode command changes the native speed of all interfaces in the port group, eth 1/1/9-1/1/12. In this guide, only port 1/1/9 is used. Repeat the above commands on the second leaf switch if it is also connected to a 10GbE adapter on the jump box. After the port group mode change is made, the interface naming changes from eth 1/1/x to eth 1/1/x:n, where x is the physical port number, and n is the logical port number. In this example, changing port group 1/1/3 to 10GbE also changes the affected interface names to eth1/1/9:1- 1/1/12:1. Port-group configuration options for the S5248F-ON are shown in Table 20. Port group number S5248F-ON port-group configuration options Native physical interface name Native speed Other supported speeds 1/1/1 1/1/2 1/1/3 1/1/4 1/1/5 1/1/6 1/1/7 1/1/8 1/1/9 1/1/10 1/1/11 1/1/12 1/1/13 1/1/14 1/1/15 1/1/16 1/1/17 1/1/18 Eth 1/1/1-1/1/4 Eth 1/1/5-1/1/8 Eth 1/1/9-1/1/12 Eth 1/1/13-1/1/16 Eth 1/1/17-1/1/20 Eth 1/1/21-1/1/24 Eth 1/1/25-1/1/28 Eth 1/1/29-1/1/32 Eth 1/1/33-1/1/36 Eth 1/1/37-1/1/40 Eth 1/1/41-1/1/44 Eth 1/1/45-1/1/48 Eth 1/1/49-1/1/50 Eth 1/1/51-1/1/52 Eth 1/1/53 Eth 1/1/54 Eth 1/1/55 Eth 1/1/56 25g-4x 25g-4x 25g-4x 25g-4x 25g-4x 25g-4x 25g-4x 25g-4x 25g-4x 25g-4x 25g-4x 25g-4x 100g-2x 100g-2x 100g-1x 100g-1x 100g-1x 100g-1x 10g-4x 10g-4x 10g-4x 10g-4x 10g-4x 10g-4x 10g-4x 10g-4x 10g-4x 10g-4x 10g-4x 10g-4x 50g-4x 40g-2x 10g-8x 25g-8x 50g-4x 40g-2x 10g-8x 25g-8x 50g-2x 40g-1x 10g-4x 25g-4x 50g-2x 40g-1x 10g-4x 25g-4x 50g-2x 40g-1x 10g-4x 25g-4x 50g-2x 40g-1x 10g-4x 25g-4x Non-native logical interface name Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:1 Eth 1/1/x:n Eth 1/1/x:n Eth 1/1/x:n Eth 1/1/x:n Eth 1/1/x:n Eth 1/1/x:n 47 Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7