Dell S5248F-ON EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7 - Page 7
Hardware overview - ports
View all Dell S5248F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2 2.1 Hardware overview This section briefly describes the hardware used to validate this deployment. Appendix A contains a complete listing of hardware and software validated for this guide. Dell EMC PowerSwitch S5248F-ON The S5248F-ON is a 1-Rack Unit (RU), multilayer switch with 48x25GbE, 4x100GbE, and 2x200GbE ports. This guide uses two S5248F-ONs as leaf switches. 2.2 Dell EMC PowerSwitch S5248F-ON Dell EMC PowerSwitch S3048-ON The S3048-ON is a 1-RU switch with 48x1GbE BASE-T ports and 4x10GbE SFP+ ports. This guide uses one S3048-ON switch for out-of-band (OOB) management traffic. 2.3 Dell EMC PowerSwitch S3048-ON Dell EMC VxRail 14G nodes Current Dell EMC VxRail P, V, S, and E Series nodes are built on 14th generation (14G) PowerEdge servers. VxRail P, V, and S Series nodes use a 2-RU form factor, as shown in Figure 4. Dell EMC VxRail 2-RU node (P, V, and S Series) VxRail E Series nodes use a 1-RU form factor, as shown in Figure 5. Dell EMC VxRail E Series node 7 Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7