Dell S5248F-ON EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7 - Page 43

Management Network VLAN ID

Get Dell S5248F-ON PDF manuals and user guides View all Dell S5248F-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

9.1 In a web browser on the laptop computer or jump box, connect to https://192.168.10.200 and deploy VxRail using the planning data in Table 3. Note: Step-by-step VxRail deployment GUI screenshots are beyond the scope of this guide. Management network VLAN ID During VxRail 4.7 deployment, the user is prompted for the Management Network VLAN ID in the GUI. This refers to the External Management VLAN, which is VLAN 1611 in this guide. Since ports in this VLAN are access ports (untagged), leave the value set to 0, as shown in Figure 17. Management Network VLAN ID is set to 0 during deployment Use the actual VLAN numbers for the remaining VLANs when prompted by the deployment GUI. Ports in the remaining VLANs are tagged. 43 Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
43
Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7
In a web browser on the laptop computer or jump box, connect to https://192.168.10.200 and deploy VxRail
using the planning data in Table 3.
Note:
Step-by-step VxRail deployment GUI screenshots are beyond the scope of this guide.
9.1
Management network VLAN ID
During VxRail 4.7 deployment, the user is prompted for the
Management Network VLAN ID
in the GUI. This
refers to the External Management VLAN, which is VLAN 1611 in this guide. Since ports in this VLAN are
access ports (untagged), leave the value set to 0, as shown in Figure 17.
Management Network VLAN ID is set to 0 during deployment
Use the actual VLAN numbers for the remaining VLANs when prompted by the deployment GUI. Ports in the
remaining VLANs are tagged.