Dell W-7030 AOS 6.4.x User Guide - Page 165

6. If you selected Port in step 4, select the ports you want to associate with the VLAN from the Port Selection window. or If you selected Port-Channel in step 4, click the Port-Channel ID drop-down list, select the specific channel number you want to associate with the VLAN, then select the ports from the Port Selection window. 7. Click Apply. In the CLI Use the following commands: (host)(config) #vlan (host)(config) #interface fastethernet|gigabitethernet // (host)(config-if) #switchport access vlan Creating Bulk VLANs In the WebUI 1. To add multiple VLANs at one time, click Add Bulk VLANs. 2. In the VLAN Range pop-up window, enter a range of VLANs you want to create at once. For example, to add VLAN IDs numbered 200-300 and 302-350, enter 200-300, 302-350. 3. Click OK. 4. To add physical ports to a VLAN, click Edit next to the VLAN you want to configure and click the port in the Port Selection section. 5. Click Apply. In the CLI Use the following commands: (host)(config) #vlan (host)(config) #vlan range 200-300,302-350 Creating a Named VLAN You can create, update, and delete a named VLAN. Each named VLAN has a name and needs to have one or more VLANs assigned to it. The following configurations create a named VLAN called mygroup. It has the assignment type Even, and VLAN IDs 2, 4 and 12 are assigned to this named VLAN. ArubaOS supports maximum of 256 VLANs per named VLAN. In the WebUI 1. Navigate to Configuration > Network > VLANs. 2. Select the VLAN Pool tab to open the VLAN Pool window. 3. Click Add. 4. In the VLAN Name field, enter a name that identifies this named VLAN. 5. In the Assignment Type field, select Hash or Even from the drop-down list. See Distinguishing Between Even and Hash Assignment Types on page 166 for information and conditions regarding Hash and Even assignment types. 165 | Network Configuration Parameters Dell Networking W-Series ArubaOS 6.4.x | User Guide